Anmol Chemicals is the pioneer manufacturers of L-Selenomethionine USP Grade, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher L-Selenomethionine made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of L-Selenomethionine is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ------------ Contact

Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Jumbo Packing L-Selenomethionine Suppliers

L-Selenomethionine SDS MSDS of Manufacturers Exporters, CAS Number 3211-76-5

L-Selenomethionine Properties and Specifications of Manufacturers Exporters

L-Selenomethionine SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

Section 1. Product Information

Product Name & Other Names: L-Selenomethionine or 2-Amino-4-(methylselanyl)butanoic acid.
CAS No.: 3211-76-5
EINECS EC Number: 608-705-0
Chemical Formula: C5H11NO2Se
Molecular Weight: 196.11
Relevant uses and uses advised against (if any): Industrial Manufacturing.

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Inhalation (Category 3), H331
Acute toxicity, Oral (Category 3), H301
Specific target organ toxicity - repeated exposure (Category 2), H373
Chronic aquatic toxicity (Category 1), H410

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Aquatic Toxicity
Aquatic Toxicity

GHS Label Elements
Health Hazard
Health Hazard

GHS Label Elements
Toxic
Toxic

Signal Words: Danger

Hazard statements:
H301 Toxic if swallowed.
H331 Toxic if inhaled.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308 + P311: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
P391: Collect spillage.
P405: Store locked up.
P403+233: Store in a well-ventilated place. Keep container tightly closed.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
T = Toxic.
N = Dangerous for the environment.
Risk Phrase:
R23/25 = Toxic by inhalation and if swallowed.
R48 Danger of serious damage to health by prolonged exposure.
R50/53 = Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Section 3: Composition and Information on Ingredients

Product Name & Other Names: L-Selenomethionine or 2-Amino-4-(methylselanyl)butanoic acid.
CAS No.: 3211-76-5
EINECS EC Number: 608-705-0

Section 4. First Aid & Procedure

Always get medical attention after the first aid is over.

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin:
 Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes:
 Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation:
 Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Section 5. Fire Fighting Measures

Flash Point: N/A
Auto ignition Temperature:
 N/A
Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: 
Water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.
Hazardous combustion products: Carbon oxides. Nitrogen oxides.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

Section 6. Spills and Disposals

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Section 7. Handling and Storage

Precautions for safe handling: Avoid prolonged or repeated exposure. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Protect against moisture.

Section 8. Exposure Controls & Personal Protection

Exposure Limits:
OSHA PEL: 0.2 mg/COM Ceiling for Selenium compounds (as Se).
ACGIH TLV: 0.2 mg/CBM (TWA) Selenium compounds (as Se).
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Section 9. Physical & Chemical Data

Appearance: White powder or crystals.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about 3.95
Melting Point: 265C literature.
Boiling Point:
 321C literature.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Very slightly soluble in water.
Viscosity
: Not available.

Section 10. Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures. Fine dust, when whirled up a dust explosion potential may generally be assumed. Violent reactions possible with: Strong oxidizing agents.
Incompatibility (Materials to Avoid):
 Strong reducing agents.
Conditions to Avoid: Incompatible materials, exposure to moist air or water, excessive heat and direct sunlight.
Hazardous Decomposition Products: Selenium Oxide, Carbon oxides, Nitrogen oxides and Fumes.
Hazardous Polymerization:
 Will not occur.

Section 11. Toxicological Information

Toxicity to Animals: LD50 Oral - Rat - Not available.
Carcinogenicity: Not listed as a suspected/confirmed carcinogen by ACGIH, NTP, OSHA. It is group 3 (Not classifiable as a human carcinogen) as per IARC
Mutagenic: Not available.
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.
Specific target organ toxicity: repeated exposure: May cause damage to organs through prolonged or repeated exposure.

Section 12. Ecological Information

Toxicity to fish: Not available.
Ecotoxicity: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Results of PBT and vPvB Assessment: Not available.
Bioaccumulation: No information available.
Mobility in soil: No information available.
Persistence and Degradability: Soluble in water. Persistence is unlikely.

Section 13. Disposal Suggestions

Dispose of in accordance with all applicable local, state, and federal regulations at an approved waste disposal facility.

Section 14. Transport and Label Information

DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN3283
Proper Shipping Name SELENIUM COMPOUND, N.O.S
Proper technical name: (L-SELENOMETHIONINE)
Hazard Class 6.1
Packing Group III
IMDG/IMO
UN-No UN3283
Proper Shipping Name SELENIUM COMPOUND, N.O.S
Proper technical name: (L-SELENOMETHIONINE)
Hazard Class 6.1
Packing Group III
IATA/ICAO:
UN-No UN3283
Proper Shipping Name SELENIUM COMPOUND, N.O.S
Proper technical name: (L-SELENOMETHIONINE)
Hazard Class 6.1
Packing Group III

Section 15. Regulatory Information

USA:
SARA 311/312
: Acute Health Hazard; Chronic Health Hazard. See section 2.
SARA 302 Components: Not listed.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16. Other Information

European Labeling in Accordance with EC Directives:
H301 Toxic if swallowed.
H331 Toxic if inhaled.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This L-Selenomethionine SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

L-Selenomethionine USP Grade manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Anmol Chemicals

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 12 January, 2022

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you
.